Endress+Hauser Proline Promag H 100 EtherNet/IP User Manual

Diagnosticsйandйtroubleshooting ProlineйPromagйHй100йEtherNet/IP
72 Endress+Hauser
12.6 Adapting the diagnostic information
12.6.1 Adapting the diagnostic behavior
Eachйitemйofйdiagnosticйinformationйisйassignedйaйspecificйdiagnosticйbehaviorйatйthe
factory.йTheйuserйcanйchangeйthisйassignmentйforйcertainйdiagnosticsйinformationйinйthe
Diagnostic behaviorйsubmenuй.
"Expert"йmenuййSystemййDiagnosticйhandlingййDiagnosticйbehavior
Youйcanйassignйtheйfollowingйoptionsйtoйtheйdiagnosticйnumberйasйtheйdiagnosticйbehavior:
Options Description
Alarm Measurementйisйinterrupted.йTheйtotalizersйassumeйtheйdefinedйalarmйcondition.йA
diagnosticйmessageйisйgenerated.
Warning Measurementйisйresumed.йTheйtotalizersйareйnotйaffected.йAйdiagnosticйmessageйis
generated.
Logbookйentryйonly Theйdeviceйcontinuesйtoйmeasure.йTheйdiagnosticйmessageйisйenteredйinйtheйEvent
logbookйсeventsйlist)йsubmenuйonlyйandйisйnotйdisplayedйinйalternationйwithйtheйmeasured
valueйdisplay.
Off Theйdiagnosticйeventйisйignored,йandйnoйdiagnosticйmessageйisйgeneratedйorйentered.
12.7 Overview of diagnostic information
Theйamountйofйdiagnosticйinformationйandйtheйnumberйofйmeasuredйvariablesйaffected
increaseйifйtheйmeasuringйdeviceйhasйoneйorйmoreйapplicationйpackages.
Inйtheйcaseйofйsomeйitemsйofйdiagnosticйinformation,йtheйstatusйsignalйandйthe
diagnosticйbehaviorйcanйbeйchanged.йAdaptйtheйdiagnosticйinformationйсййй72)
Diagnostic
number
Short text Remedy instructions Status
signal
[from the
factory]
Diagnostic
behavior
[from the
factory]
Diagnostic of sensor
004 Sensor 1.йChangeйsensor
2.йContactйservice
S Alarm
022 Sensorйtemperature 1.Changeйmainйelectronicйmodule
2.Changeйsensor
F Alarm
043 Sensorйshortйcircuit 1.Checkйsensorйandйcableй2.Change
sensorйorйcable
S Warning
062 Sensorйconnection 1.Checkйsensorйconnections
2.Contactйservice
F Alarm
082 Dataйstorage 1.йCheckйmoduleйconnections
2.йContactйservice
F Alarm
083 Memoryйcontent 1.йRestartйdevice
2.йContactйservice
F Alarm
190 Specialйeventй1 Contactйservice F Alarm
Diagnostic of electronic
201 Deviceйfailure 1.йRestartйdevice
2.йContactйservice
F Alarm
222 Electronicйdrift Changeйmainйelectronicйmodule F Alarm
242 Softwareйincompatible 1.йCheckйsoftware
2.йFlashйorйchangeйmainйelectronics
module
F Alarm

Endress+Hauser Proline Promag H 100 EtherNet/IP Specifications

General

Brand	Endress+Hauser
Model	Proline Promag H 100 EtherNet/IP
Category	Measuring Instruments
Language	English