Endress+Hauser Proline Promag H 100 EtherNet/IP User Manual

Diagnosticsйandйtroubleshooting ProlineйPromagйHй100йEtherNet/IP
74 Endress+Hauser
Diagnostic
number
Short text Remedy instructions Status
signal
[from the
factory]
Diagnostic
behavior
[from the
factory]
531 Emptyйpipeйdetection ExecuteйEPDйadjustment S Warning
537 Configuration 1.йCheckйIPйaddressesйinйnetworkй2.
ChangeйIPйaddress
F Warning
590 Specialйeventй3 Contactйservice F Alarm
Diagnostic of process
832 Electronicйtemperature
tooйhigh
Reduceйambientйtemperature S Warning
й1)
833 Electronicйtemperature
tooйlow
Increaseйambientйtemperature S Warning
й1)
834 Processйtemperature
tooйhigh
Reduceйprocessйtemperature S Warning
й1)
835 Processйtemperature
tooйlow
Increaseйprocessйtemperature S Warning
й1)
842 Processйlimit Lowйflowйcutйoffйactiveк
1.йCheckйlowйflowйcutйoff
configuration
S Warning
862 Emptyйpipe 1.йCheckйforйgasйinйprocess
2.йAdjustйemptyйpipeйdetection
S Warning
882 Inputйsignal 1.йCheckйinputйconfiguration
2.йCheckйexternalйdeviceйorйprocess
conditions
F Alarm
937 EMCйinterference 1.йCheckйambientйconditions
regardingйEMCйinfluence
2.йChangeйmainйelectronicйmodule
S Warning
937 EMCйinterference Changeйmainйelectronicйmodule S Warning
990 Specialйeventй4 Contactйservice F Alarm
1) Diagnosticйstatusйisйchangeable.
12.8 Pending diagnostic events
TheйDiagnosticsйmenuйallowsйtheйuserйtoйviewйtheйcurrentйdiagnosticйeventйandйthe
previousйdiagnosticйeventйseparately.
Toйcallйupйtheйmeasuresйtoйrectifyйaйdiagnosticйevent:
• ViaйWebйbrowserйсййй70)
• Viaй"FieldCare"йoperatingйtoolйсййй71)
OtherйpendingйdiagnosticйeventsйcanйbeйdisplayedйinйtheйDiagnostic list
submenuсййй75)
Navigation
"Diagnostics"йmenu
Structure of the submenu
Diagnostics

Actualйdiagnostics
Previousйdiagnostics

Endress+Hauser Proline Promag H 100 EtherNet/IP Specifications

General

Brand	Endress+Hauser
Model	Proline Promag H 100 EtherNet/IP
Category	Measuring Instruments
Language	English