Endress+Hauser Proline Promag H 100 EtherNet/IP - Advancedйsettings; Carryingйoutйaйsensorйadjustment; Configuringйtheйtotalizer

ProlineйPromagйHй100йEtherNet/IP Commissioning
Endress+Hauser 55
10.4 Advanced settings
TheйAdvanced setupйsubmenuйwithйitsйsubmenusйcontainsйparametersйforйspecific
settings.
Overview of the parameters and submenus in the "Advanced setup" submenu
Advanced setup

Enterйaccessйcode
Defineйaccessйcode
сййй61)
Sensorйadjustment
сййй55)
Totalizerй1йtoй3
сййй55)
Electrodeйcleaningйcircuit
сййй59)
10.4.1 Carrying out a sensor adjustment
TheйSensor adjustmentйsubmenuйcontainsйparametersйthatйpertainйtoйtheйfunctionalityйof
theйsensor.
Navigation
"Setup"йmenuййAdvancedйsetupййSensorйadjustment
Structure of the submenu
Sensor adjustment

Installationйdirection
Parameter overview with brief description
Parameter Description Selection Factory setting
Installationйdirection Setйsignйofйflowйdirectionйtoйmatchйthe
directionйofйtheйarrowйonйtheйsensor.
• Flowйinйarrowйdirection
• Flowйagainstйarrowйdirection
Flowйinйarrowйdirection
10.4.2 Configuring the totalizer
Inйtheй"Totalizer 1 to 3" submenuйtheйindividualйtotalizersйcanйbeйconfigured.
Navigation
"Setup"йmenuййAdvancedйsetupййTotalizerй1йtoй3
Totalizer 1 to 3

Assignйprocessйvariable
Unitйtotalizer
Failureйmode