Endress+Hauser Proline Prosonic Flow 93 Function Manual

PROline Prosonic Flow 93 FOUNDATION Fieldbus 3 Transducer Blocks (transmission blocks)
Endress+Hauser 147
Info Line
Multiplex -
Display Mode
AUTO - OOS
 Note!
Selection is not active unless one of the following was selected in the
"Info Line - Multiplex Assign" parameter:
• VOLUME FLOW BARGRAPH % CH1
• VOLUME FLOW BARGRAPH % CH2
• CALC. VOLUME FLOW BARGRAPH %
• SIGNAL BARGRAPH CH1
• SIGNAL BARGRAPH CH2
Use this parameter to define the format of the bar graph.
Options:
STANDARD
Simple bar graph with 25 / 50 / 75% gradations and integrated sign.
SYMMETRY
Symmetrical bar graph for positive and negative directions of flow
with –50 / 0 / +50% gradations and integrated sign.
Factory setting:
STANDARD
Amp. Device
Family
read only This parameter is only used in the event of servicing.
“TRANSDUCER_DISP” (E+H parameters) / base index 1500
Parameter Write access
with operating
mode
(MODE_BLK)
Description
F-x3xxxxx-20-xx-xx-xx-000
F-x3xxxxx-20-xx-xx-xx-001

Endress+Hauser Proline Prosonic Flow 93 Specifications

General

Brand	Endress+Hauser
Model	Proline Prosonic Flow 93
Category	Measuring Instruments
Language	English