Endress+Hauser SpectraSensors J22 TDLAS User Manual

J22 TDLAS Gas Analyzer 4900002277
SpectraSensors, Inc. 105
Parameter overview with brief description
Switch status 1 to n
Relay output 1 to n simulation
Switch status 1 to n
Device alarm simulation
Diagnostic event category
Diagnostic event simulation
Parameter Prerequisite Description User Entry Factory Setting
Current output 1
to n simulation
— Switch the simulation
of the current output
on and off.
•Off
•On
Off
Value current out-
put 1 to n
In the Current out-
put 1 to n simula-
tion parameter, the
On option is
selected.
Enter the current value
for simulation.
3.59 to 22.5 mA 3.59 mA
Switch output sim-
ulation 1 to n
In the Operating
mode parameter,
the Switch option is
selected.
Switch the simulation
of the switch output on
and off.
•Off
•On
Off
Switch status 1
to n
— Select the status of the
status output for the
simulation.
•Open
•Closed
Open
Relay output 1 to n
simulation
—— •Off
•On
Off
Switch status 1
to n
In the Switch out-
put simulation 1
to n parameter, the
On option is
selected.
—•Open
•Closed
Open
Device alarm sim-
ulation
— Switch the device
alarm on and off.
•Off
•On
Off

Endress+Hauser SpectraSensors J22 TDLAS Specifications

General

Brand	Endress+Hauser
Model	SpectraSensors J22 TDLAS
Category	Measuring Instruments
Language	English