Endress+Hauser SpectraSensors J22 TDLAS - 8 Operation; Configuring the Display; Reading Measured Values; Output Values

4900002277 J22 TDLAS Gas Analyzer
86 SpectraSensors, Inc.
8Operation
Configuring the
Display
Detailed information:
• On the basic settings for the local display→  66
• On the advanced settings for the local display →  73
Reading Measured
Values
With the Measured values submenu, it is possible to read all the measured values.
Navigation
"Diagnostics" menu → Measured values
Output values
The Output values submenu contains all the parameters needed to display the
current measured values for every output.
Navigation
"Diagnostics" menu → Measured values→ Output values
Output values of current output
The Value current output submenu contains all the parameters needed to display
the current measured values for every current output.
Navigation
"Diagnostics" menu → Measured values → Output values → Value current output 1
to n
Measured values
Output values
Ouput values
Switch output 1 to n
Current output 1 to n
Relay output 1 to n
Output current 1 to n
Current output 1 to n
Measured current 1 to n