Endress+Hauser SpectraSensors J22 TDLAS - Configuring the output modules

4900002277 J22 TDLAS Gas Analyzer
60 SpectraSensors, Inc.
Configuring the current output
The Current output wizard guides you systematically through all the parameters
that have to be set for configuring the current output.
Navigation
"Setup" menu → Current output
Parameter overview with brief description
Apply I/O configuration Apply parameterization of the
freely configurable I/O module.
•No
•Yes
No
Conversion code Enter the code to change the I/O
configuration.
Positive integer
—
1)
1) Based on order configuration.
2) Visibility depends on order options or device settings.
Parameter Description User Entry Factory Setting
Terminal number
Current output 1 to n
Signal mode
Assign current output 1 to n
Current span
0/4 mA value
20 mA value
Fixed current
Failure mode
Failure current
Parameter Prerequisite Description User Entry Factory Setting
Assign current
output 1 to n
— Select process variable
for current output.
•Off —