J22 TDLAS Gas Analyzer 4900002277
SpectraSensors, Inc. 27
Menu/Parameter User Role and Tasks Content/Meaning
Language Task-oriented Role "Operator", Maintenance
Tasks during operation:
• Configuring the operational
display
• Reading measured values
• Defining the operating language
• Defining the Web server operat-
ing language
Operation • Configuring the operational dis-
play (e.g., display format)
Setup "Maintenance" role
Commissioning:
• Configuration of the measure-
ment
• Configuration of the outputs
• Configuration of the communi-
cation interface
Wizards for fast commissioning:
• Set the system units
• Configuration of the communica-
tion interface
• Display I/O configuration
• Configure the outputs
• Configuring the operational dis-
play
• Define the output conditioning
Advanced setup
• For more customized configura-
tion of the measurement (adap-
tation to special measuring
conditions)
• Adminstration (define access
code, reset measuring device)
Diagnostics "Maintenance" role
Fault elimination:
• Diagnostics and elimination of
process and device errors
• Measured value simulation
Contains all parameters for error
detections and analyzing process
errors:
• Diagnostic list
Contains up to 5 currently pend-
ing diagnostics messages.
• Event logbook
Contains event messages that
have occurred.
• Device information
Contains information for identi-
fying the device.
• Measured values
Contains all current measured
values.
• Data logging submenu
Storage and visualization of mea-
sured values
• Heartbeat
The functionality of the device is
checked on demand and the veri-
fication results are documented.
• Simulation
Is used to simulate measured val-
ues or output values.
To Next Page
Loading...
Need help?
General
