Epson Aculaser c9100 - Monitored Printers Settings

Using the Printer Software with Windows 111
3
3
3
3
3
3
3
3
3
3
3
3
Monitored Printers settings
You can use the Monitored Printers utility to change the types of
printers that EPSON Status Monitor 3 will monitor. When you
install EPSON Status Monitor 3, this utility is also installed.
Usually, it is not necessary to change a setup.
1. Click Start, point to Programs, point to EPSON Printers, then
click Monitored printers.
2. Clear the check boxes of the types of printers you do not want
to monitor.
3. Click OK to apply the settings.