286 Troubleshooting
Completely blank pages are output
Cause What to do
The printer may have loaded
more than one sheet at a time.
Remove the paper stack and fan it. Tap
it on a flat surface to even the edges, then
reload the paper.
There may be no toner left in
the toner cartridge.
If the message on the LCD panel or in the
EPSON Status Monitor 3 indicates that
the amount of toner is low, see
“Replacing a toner cartridge” on page
227.
The problem may be with your
application or interface cable.
Print out a status sheet. See “Printing a
Status Sheet” on page 276. If a blank
page is ejected, the problem may be with
the printer. Turn off the printer and
contact your dealer.
The Paper Size setting may be
incorrect.
Make sure the correct paper size is set in
the Tray Menu on the control panel.
There may be a problem with
the
photoconductor unit.
Replace the
photoconductor unit. See
“Photoconductor Unit” on page 231.
MP Tray Size setting may be
incorrect.
When loading paper for which the size
is not specified with Auto setting,
specify the correct paper size on the MP
Tray Size setting in the Tray Menu on the
control panel.
To Next Page
Loading...
