Epson Aculaser c9100 - The Printed Image Is Light or Faint; The Non-Printed Side of the Page Is Dirty

Troubleshooting 287
8
8
8
8
8
8
8
8
8
8
8
8
The printed image is light or faint
The non-printed side of the page is dirty
Cause What to do
Your paper may be moist or
damp.
Do not store your paper in a humid or
damp environment.
The Toner Save mode may be
on.
Turn off the Toner Save mode using the
printer driver or the printer’s control
panel menus. To modify the Toner Save
mode using the printer driver, select the
Advanced button in the Basic Setting
menu, and click the More Settings.
Deselect the Toner Save check box in
the More Settings dialog box that
appears.
There may be no toner left in
the toner cartridge.
If the message on the LCD panel or in
EPSON Status Monitor 3 indicates that
the amount of toner left is low, see
“Replacing a toner cartridge” on page
227.
There may be a problem with
the
photoconductor unit.
Replace the
photoconductor unit. See
“Photoconductor Unit” on page 231.
Cause What to do
Toner may have spilled onto
the paper feed path.
Clean internal printer components by
printing three pages with only one
character per page.