Paper Handling 51
2
2
2
2
2
2
2
2
2
2
2
2
Thick paper and extra thick paper
You can load thick paper (106 to 169 g/m²) or extra thick paper
(170 to 216 g/m²) into the MP tray.
When loading thick or extra thick paper, you should make paper
settings as shown below:
❏ Make settings on the Basic Settings in the printer driver.
❏ You can also make these settings on the Tray Menu in the
control panel. See “Tray Menu” on page 346.
Note:
❏ When using thick and extra thick paper, you cannot do duplex
printing automatically. When you want to make duplex printing
with thick paper, set the Page side setting on the control panel’s
Setup Menu to Back or Front, then print manually.
❏ When printing on the back side of previously printed paper, select
Thick (Back) or Extra Thick (Back).
❏ When printing on small thick paper, like post cards, select Thick
Narrow.
Paper Size Paper Source Paper Type
A4, A5, B5, Letter (LT),
Half-Letter (HLT),
Government Letter
(GLT), Executive (EXE)
MP Tray (up to 18 mm
thick stack)
Thick or
Extra Thick
A3, B4, Ledger (B), Legal
(LGL), Government
Legal (GLG)
MP Tray (up to 10 mm
thick stack)
To Next Page
Loading...
Need help?
General