358 Functions of the Control Panel
Reset
Stops printing and clears the current job received from the active
interface. You may want to reset the printer when there is a
problem with the print job itself and the printer cannot print
successfully.
Reset All
Stops printing, clears the printer memory, and restores the printer
settings to their default values. The print jobs received from all
interfaces are erased.
Note:
Performing Reset All clears print jobs received from all interfaces. Be
careful not to interrupt someone else’s job.
SelecType Init
Restores the control panel menu settings to their default values.
Parallel Menu
These settings control communication between the printer and
the computer when using the parallel interface.
Parallel I/F
Allows you to activate or deactivate the parallel interface.
Item Settings (default in bold)
Parallel I/F On, Off
Speed Fast, Normal
Bi-D Nibble, ECP, Off
Buffer Size Normal, Maximum, Minimum
To Next Page
Loading...
