34 Paper Handling
Selecting a paper source
You can specify a paper source manually, or set the printer to
select the paper source automatically.
Manual selection
You can use the printer driver or the printer’s control panel to
select a paper source manually.
To access the printer driver, for Windows, see “Accessing the
printer driver” on page 53, or for Macintosh, see “Accessing the
printer driver” on page 120.
And to use the printer’s control panel, see “Using the Control
Panel Menus” on page 338:
❏ Using the printer driver
For Windows users:
Access the printer driver, click the Basic Settings tab, and
select the paper source that you want to use from the Paper
Source list. Then click OK.
For Macintosh users:
Access the printer driver, select Printer Settings from the
drop-down list and click the Basic Settings tab (for Mac OS
X), or open the Basic Settings dialog box (for Mac OS 9). Then,
select the paper source that you want to use from the Paper
Source list and click OK.
❏ Using the printer’s control panel
Access the control panel’s Setup Menu, then select Paper
Source and specify the paper source you want to use.
To Next Page
Loading...
