140 Using the Printer Software with Macintosh
Note:
To remove the saved watermark, select it from the List box, then click
Delete. After removing it, be sure to click Save to close the dialog
box.
6. Select the saved custom watermark from the Watermark
drop-down list on the Layout dialog box, then click OK.
Printing with the duplex unit
Duplex printing prints on both sides of the paper. When printing
for binding, the binding edge can be specified as required to
produce the desired page order.
As an
ENERGY STAR
®
partner, Epson recommends the use of
the double-sided printing function. Refer to
ENERGY STAR
®
Compliance for more information on the ENERGY STAR
®
program.
For Mac OS X users
1. Open the Print dialog box.
2. Select Printer Settings from the drop-down list, and select
Basic settings tab.
3. Click Duplex check box, then click the Duplex Settings
button.
4. Select a Binding position from Left, Top, or Right.
5. Specify the Binding Margin for the front and back sides of the
paper.
6. Select whether the front or back side of the paper is to be
printed as the Start Page.
7. Click Print to start printing.
To Next Page
Loading...
