Epson Aculaser c9100 - Re-Print Job

Using the Printer Software with Macintosh 145
4
4
4
4
4
4
4
4
4
4
4
4
Jobs stored on the Hard Disk Drive are handled differently
depending on the Reserve Job option. Refer to the tables below
for details.
Re-Print Job
The Re-Print Job option allows you to store the job you are
currently printing so that you can reprint it later directly from the
control panel.
Follow the steps below to use the Re-Print Job option.
Reserve Job
Option
Maximum
Number of
Jobs
When
Maximum is
Exceeded
When Drive is Full
Re-Print Job
+ Verify Job
64
(combined
total)
Oldest job
automatically
replaced with
newest
Oldest job
automatically
replaced with
newest
Stored Job 64 Delete old jobs
manually
Delete old jobs
manually
Confidential
Job
64
Reserve Job
Option
After Printing After Turning Off Printer or Using
Reset All
Re-Print Job Data remains on
the Hard Disk
Drive
Data is cleared
Verify Job
Stored Job Data remains on the Hard Disk Drive
Confidential
Job
Data is cleared Data is cleared