Technical Specifications 319
A
A
A
A
A
A
A
A
A
A
A
A
EPSON Quick Fuser Technology
The printer warms up faster than conventional printers. About 30
seconds are required from power ON to when printing can be
done at normal temperature. The time depends on the printer’s
optional configuration. Furthermore, if printing data is received
in the sleep mode, printing will be started after a warm up time
of about 30 seconds. When the temperature is low and humidity
is high, about 300 seconds are required from power ON to when
printing can be done.
Duplex printing
This printer comes with a built-in duplex unit, allowing you to
easily print on both sides of the page. You can produce
professional quality double-sided documents. Use this feature
with any print job to cut costs and save resources.
As an
ENERGY STAR
®
partner, Epson recommends the use of
the duplex printing function. See
ENERGY STAR
®
Compliance
for more information on the
ENERGY STAR
®
program.
Reserve Job function
The Reserve Job function lets you store a print job on the printer’s
Hard Disk Drive and reprint it directly from the printer’s control
panel at any time without using your computer.
You can also print one copy in order to verify the content before
printing multiple copies. If the content of the print job is
confidential, you can set a password to limit access to it.
For Windows, see “Using the Reserve Job Function” on page 84
for more information.
For Macintosh, see “Using the Reserve Job Function” on page 144
for more information.
Note:
You need an optional Hard Disk Drive installed in your printer in order
to use the Reserve Job function.
To Next Page
Loading...
