76 Using the Printer Software with Windows
Different printer settings overlay data
The overlay data is made with the current printer settings (such
as Resolution: 600 dpi). If you want to make the same overlay with
different printer settings (such as 300 dpi), follow the instructions
below.
1. Re-access the printer driver as described in step 2 in “Creating
an overlay” on page 70.
2. Make the printer settings and exit the printer driver.
3. Send the same data that you made by application to the
printer like step 12 in “Creating an overlay” on page 70.
This setting is available only for Form Name data.
Using HDD form overlay
This function enables faster printing with form overlay data.
Windows users can use the form data registered on the optional
Hard Disk Drive installed in the printer though only an
administrator can register or delete the form data on the Hard
Disk Drive. You can access this function from the Form Selection
dialog box in the printer driver.
Note:
❏ This function is not available when the Color setting is set to Black
in the printer driver’s Basic Settings menu.
❏ This function is not available if the optional Hard Disk Drive is not
installed.
❏ Use this function by inputting the registered form name after
printing the Print List.
To Next Page
Loading...
