Epson Aculaser c9100 - Emulation Menu

Functions of the Control Panel 347
B
B
B
B
B
B
B
B
B
B
B
B
LC1 Size/LC2 Size/LC3/LC4 Size
Displays the paper size loaded in the standard and optional lower
cassettes.
MP Type
Lets you set the paper type loaded in the MP tray.
LC1 Type/LC2 Type/LC3 /LC4Type
Lets you select the paper type loaded in the standard and optional
lower cassettes.
Emulation Menu
Use this menu to select the printer emulation mode. You can
specify different emulations for each interface; in other words, for
each computer you connect the printer to. Since each emulation
mode has its own specific options, make settings in the LJ4,
ESC P2, FX, GL2, or I239X menu, as necessary. The settings you
can choose from are the same for every interface.
* Available only when the optional Adobe PostScript 3 ROM module is
installed.
** Available only when an optional Type-B interface card is installed.
***Available only when an optional P5C module is installed.
Item Settings (default in bold)
Parallel Auto, LJ4, ESCP2, FX, I239X, PS3*, GL2, P5C***
USB Auto, LJ4, ESCP2, FX, I239X, PS3*, GL2, P5C***
Network Auto, LJ4, ESCP2, FX, I239X, PS3*, GL2, P5C***
AUX** Auto, LJ4, ESCP2, FX, I239X, PS3*, GL2, P5C***