Epson Aculaser c9100 - Installing EPSON Barcode Fonts; System Requirements

Working with Fonts 379
C
C
C
C
C
C
C
C
C
C
C
C
System requirements
To use EPSON BarCode Fonts, your computer system should
meet the following requirements:
Note:
EPSON BarCode Fonts can only be used with Epson printer drivers.
Installing EPSON BarCode Fonts
Follow the steps below to install EPSON BarCode Fonts. The
procedure described here is for installation in Windows 98; the
procedure for other Windows operating systems is nearly the
same.
1. Make sure that the printer is off and that Windows is running
on your computer.
2. Insert the printer software CD-ROM in the CD-ROM drive.
Note:
❏ If the language section window appears, select your country.
❏ If the EPSON Installation Program screen does not appear
automatically, double-click the My Computer icon, right-click
the CD-ROM icon, and click OPEN in the menu that appears.
Then double-click Epsetup.exe.
Computer: IBM PC series or IBM compatible with an
i386SX or higher CPU
Operating system: Microsoft Windows XP, Me, 98, 95, 2000,
NT 4.0, or Server 2003
Hard disk: 15 to 30 KB free space, depending on the font.