Using the Printer Software with Windows 77
3
3
3
3
3
3
3
3
3
3
3
3
❏ When the document’s resolution, paper size or paper orientation
settings are different from the form overlay data that you use, you
cannot print the document with the form overlay data.
❏ This function is available in the ESC/Page mode.
Register the form overlay data on the Hard Disk Drive
Only a network administrator using Windows XP, 2000, NT 4.0,
or Server 2003 is allowed to register the form overlay data on the
optional Hard Disk Drive. See the Network Guide for details.
Printing with HDD form overlay
All Windows users can use the registered form data on the
optional Hard Disk Drive. Follow the steps below to print with
HDD form data.
1. Click the Special tab.
2. Select the Form Overlay check box, and click Overlay
Settings. The Overlay Settings dialog box appears.
3. Select No Form name in the Form drop-down list, and click
Details. The Form Selection dialog box appears.
Note:
Make sure that No Form name is selected. If any form name is
selected, another dialog box will appear.
4. Click Printer’s HDD, then enter the registered form name.
To Next Page
Loading...
