264 Troubleshooting
c
Caution;
❏ If the jammed paper is wrapped around the fuser unit or
the roller, do not remove it by force. Turn off the printer
immediately and contact your dealer.
❏ Do not pull out the jammed paper from the MP tray.
Doing so may cause raw toner to adhere to the roller and
get the next paper being fed dirty.
7. If the end of the jammed paper sticks out of the paper
discharge slot, hold the paper end with both hands and pull
it out in the direction of the arrow.
8. Pull the jammed paper further in the direction of the arrow
with both hands until the end of the paper comes out from the
fuser unit.
To Next Page
Loading...
