Saving a User Pattern
146
There are four types of patterns pre-registered in the projector, such as ruled
lines and grid patterns. You can project these patterns to aid in presentations
using the Pattern Display settings.
You can also save the image that is currently being projected as a User
Pattern.
a
• Once you save a User Pattern, the pattern cannot be returned to the
factory default.
• You cannot save content that is protected by HDCP.
a
Project the image you want to save as the User Pattern.
b
Press the [Menu] button, select the Management menu, and press
[Enter].
c
Select User Pattern and press [Enter].
You see a prompt asking if you want to use the displayed image as a
User Pattern.
a
Adjustments such as Keystone, E-Zoom, Aspect, Adjust Zoom,
or Image Shift are temporarily cancelled when you select User
Pattern.
d
Select Yes and press [Enter].
You see a prompt asking if you want to save the image as the User
Pattern.
e
Select Yes and press [Enter].
You see a completion message.
f
Select the Display menu and press [Enter].
g
Select Pattern Type and set it to User Pattern.
To Next Page
Loading...
Need help?
General
