Adjusting the Image Height
62
If you are projecting from a table or other flat surface and the image is too
high or low, you can adjust the image height using the projector's adjustable
feet (only for models supplied with the feet).
The larger the angle of tilt, the harder it becomes to focus. Locate the
projector so that it only needs to be tilted at a small angle.
a
Turn on the projector and display an image.
b
To adjust the image height, rotate the front feet to extend or retract
them.
A
Extend the front foot
B
Retract the front foot
c
If the image is tilted, rotate the front feet to adjust their height.
If the projected image is unevenly rectangular, you need to adjust the image
shape.
To Next Page
Loading...
Need help?
General
