Projector Connections
41
b
Locate the appropriate cable to connect your external speakers, such as
a stereo mini-jack-to-pin-jack cable, or another type of cable or adapter.
c
Connect one end of the cable to your external speakers as necessary.
d
Connect the stereo mini-jack end of the cable to your projector's Audio
Out port.
Connecting a Microphone
You can connect a microphone to the projector's Mic port to provide audio
support during presentations
(EB‑735Fi/EB‑735F/EB‑725Wi/EB‑725W/EB‑720).
a
• Plug-in-power is not supported.
• If you want to output audio from a microphone when the projector
does not project any images, set the A/V Output setting to Always
On in the projector's Signal I/O menu.
• Adjust the Mic Input Level setting in the projector's Signal I/O
menu if the microphone audio is difficult to hear, or if it is too loud
resulting in a crackling sound.
a
Connect the microphone cable to the projector's Mic port.
b
Turn on the microphone, if necessary.
Connecting Multiple Projectors of the Same Model
When using multiple projectors and interactive features in the same room,
connect the optional remote control cable set to the SYNC port on each
projector (EB‑735Fi/EB‑725Wi). By doing so, the interactive pen operates
stably.
a
Connect the optional remote control cable set to the SYNC OUT port
on one projector, and connect the other end to the SYNC IN port on
the other projector.
To Next Page
Loading...
Need help?
General
