Adjusting the Image Position
74
You can use the Image Shift feature to adjust the image position without
moving the projector.
a
• This feature is not available if the Zoom option is set to the widest
setting.
• We recommend adjusting the image position at least 30 minutes after
you start projecting, because images are not stable right after turning
on the projector.
a
Turn on the projector and display an image.
b
Adjust the image size using the Wide and Tele buttons.
After you adjust the image size, the Image Shift screen is displayed
automatically.
c
Use the arrow buttons to adjust the image position.
d
Press the [Esc] button to close the adjustment screen.
The adjustment screen disappears if no operation is performed after
approximately 10 seconds.
a
• The Image Shift setting is retained even if the projector is turned off.
You need to re-adjust the position if you change the installation
location or angle of the projector.
• You can also adjust the Image Shift setting in the projector's
Installation menu.
To Next Page
Loading...
Need help?
General
