Epson EB-755F - Page 197

Controlling a Networked Projector Using a Web Browser
197
a
You cannot change the following settings using Epson Web Control.
• EDID (EB‑755F/EB‑750F/EB‑735Fi/EB‑735F)
• USB Display (EB‑735Fi/EB‑725Wi)
• HDMI Link
• Fixed Installation
• Setting Plate Installation Guide
• Auto Screen Adjustment (EB‑735Fi/EB‑725Wi)
• Image Shift
• Connect ELPCB02
(EB‑735Fi/EB‑735F/EB‑725Wi/EB‑725W/EB‑720)
• Touch Unit (EB‑735Fi/EB‑725Wi)
• Pattern Display
• Split Screen Setting
• Content Playback (EB‑755F/EB‑750F)
• User Button
• User's Logo
• User Pattern
• Language
• Display Logs
• Search Access Point
• Crestron Connected
• Pen/Touch menu (EB‑735Fi/EB‑725Wi)
• Test Print (EB‑735Fi/EB‑725Wi)
• Check Connection (EB‑735Fi/EB‑725Wi)
• Send a test e-mail (EB‑735Fi/EB‑725Wi)
• Event ID
• Antenna Level
• ECO menu
• Reset Network Settings
• Firmware Update
a
You can select the following settings only with Epson Web Control.
• Monitor Password (up to 16 alphanumeric characters)
• IPv6 Settings (manual)
• HTTP port (port number used for Web Control except for 80
[default], 843, 3620, 3621, 3625, 3629, 4352, 4649, 5357, 10000,
10001, 41794)
Remote (only in Content Playback mode)
Options on the Remote screen allow you to select the input source, control
the projector, and start projecting playlists.
A
Returns to the Epson Web Control screen.
B
Turns the projector on or off.