Adjusting the Image Color
86
When you select a smaller value, you can reduce the overall brightness
of the image to make the image sharper. When you select a larger value,
the dark areas of images become brighter, but the color saturation for
lighter areas may become weaker.
a
• If you set the Color Mode setting to DICOM SIM in the
projector's Image menu, select the adjustment value according
to the projection size (EB‑755F/EB‑750F).
• If the projection size is 80 inches or less, select a small value.
• If the projection size is 80 inches or more, select a large
value.
• Medical images may not be reproduced correctly depending on
your settings and screen specifications.
f
If you want to make finer adjustments, select Customized and press
[Enter].
g
Press the left or right arrow buttons to select the color tone you want to
adjust on the gamma adjustment graph. Then press the up or down
arrow button to adjust the value and press [Enter].
h
Press [Menu] or [Esc] to exit the menus.
To Next Page
Loading...
Need help?
General
