Epson RC180

Maintenance 8. Trouble Shooting
RC180 Rev.17
236
No. Message Remedy Note 1 Note 2
7502
Smart camera. Project has not been
set.
Rebuild the project.
7503
Smart camera.
Vision property or
result not supported.
Update the camera firmware.
7504
Smart camera. Cannot open project
file.
Rebuild the project.
7505 Undefined vision sequence.
Check the sequence name.
Rebuild the project.
7506 Undefined vision object.
Check the object name.
Rebuild the project.
7507 Smart camera. Critical error.
Initialize the camera.
Rebuild the project.
7508
Smart camera. Invalid command.
Update the camera firmware.
7509 Invalid vision property value.
Check the property value.
Update the camera firmware.
7510 Invalid vision property.
Check the property name.
Update the camera firmware.
7511
Vision model not trained.
Teach the model.
7512 Undefined vision calibration.
Check the calibration name.
Rebuild the project.
7513
Vision model object not Self.
Check the property value.
7514 Invalid vision result.
Check the result name.
Update the camera firmware.
7515 Vision object not found.
Check the Found result before obtaining
the result.
7516
No vision calibration.
Check the calibration name.
7517
Incomplete vision calibration.
Perform calibration.
7518
Smart camera.
Cannot connect with camera.
Check the camera connection.
7519
Smart camera.
Communication error.
Check the camera connection.