EPSON Stylus Pro GS6000 Revision F
PRODUCT DESCRIPTION Basic Specifications 15
Confidential
ROLL PAPER
STANDARDS AND APPROVALS
MECHANISM
Item Specification
Paper size (width)
300 mm (12") to 1625 mm (64")
Internal diameter 3 inches
Outer diameter
Max. 170 mm (6.7")
Thickness
When Head height
adjustment lever is Low
Max 0.3 mm
When Head height
adjustment lever is High
Max 1.3 mm
Weight Max. 30 kg
Item Specification
Safety
UL 60950-1
CSA No. 60950-1
Low Voltage Directive
2006/95/EC
EN 60950-1
EMC
FCC part 15 subpart B class A
CAN/CSA-CEI/IEC CISPR 22 Class A
AS/NZS CISPR 22 Class A
EMC Directive
2004/108/EC
EN 55022 Class A
EN 55024
EN 61000-3-2
EN 61000-3-3
Item Specification
CR and PF drive method
Servo motor and DC motor are operated by the firmware
Paper feed method Loads paper at the rear and ejects paper to the front
Print Head
180 nozzles x 8 rows
Two Print Heads are mounted.
Ink
Ink supply
method
Ink is supplied from the independent ink cartridges
through a tubes via the sub tanks.
Ink type Eco-Solvent ink
Ink colors
Black, Cyan, Magenta, Yellow, Light Cyan,
Light Magenta, Green, Orange
Waste ink tank
Attachment Secured to the main unit
Capacity 2,000 ml
Full tank
detection
Detected by the float sensor
Noise 50dB or lower
Take-Up Reel
Unit
Drive method Driven by DC geared motor
To Next Page
Loading...
