Epson Stylus Pro GS6000 Revision F
ADJUSTMENT Other Adjustments 232
Confidential
5.6.8 CR Origin Adjustment
This is to adjust the point of origin of the Carriage.
Procedure
1. Enter the Serviceman Mode.
Turn the printer ON while pressing [Pause/Reset] + [Paper Feed ] +
[Menu] simultaneously.
2. Select Adjustment => CR Origin Adjust => Execute.
The printer moves the carriage and gets it back slowly to its capping position to define
its origin point and register it on the MAIN BOARD ASSY.
To Next Page
Loading...
