Epson Stylus Pro GS6000 - Orientation Definition; Recommended Tools

Epson Stylus Pro GS6000 Revision F
DISASSEMBLY & ASSEMBLY Overview 66
Confidential
4.1.2 Orientation Definition
The terms used for indicating the orientation/direction throughout this chapter are as
follows.
Figure 4-1. Orientation Definition
4.1.3 Recommended Tools
To protect this product from damage, use the tools indicated in the following table.
Up
Down
Left
Right
Rear
Front
Table 4-1. Tools
Name Epson Part Number Note
Phillips screwdriver, No. 1 Commercially available ---
Phillips screwdriver, No. 2 Commercially available ---
Hexagonal Box driver Commercially available
5 mm
Hexagonal wrench Commercially available
3 mm
Hexagonal wrench (Long shaft) Commercially available
2.5 mm
Long-nose pliers Commercially available ---
Tweezers Commercially available ---
Nippers Commercially available ---
GS6K/TUBE HOLDER 1501560 ---
GS6K/SPRING SET TOOL 1501561
GS6K/HEAD HOLDER 1501562
GS6K/PG ADJUSTMENT JIG 1501563 ---
GS6K/BELT TENSION
ATTACHMENT
1501564 ---
Thread locker Commercially available
You must use the following product.
 Supplier: ThreeBond
 Product name: 1401