Epson Stylus Pro GS6000 - Service Program Basic Operations

Epson Stylus Pro GS6000 Revision F
ADJUSTMENT Overview 192
Confidential
5.1.5 Service Program Basic Operations
This section describes the basic operations of the Service Program.
 System Requirements
 OS: Windows XP, VISTA
 Interface: USB, Network
 Startup
1. When double-clicking the “ServProg.exe”, the screen asking if you want to carry
out the NV-RAM BACKUP appears.
2. If Yes is selected, the NV-RAM BACKUP UTILITY will start up; If No is
selected, the Service Program Menu screen will appear.
Figure 5-1. Service Program Menu
NV-RAM BACKUP UTILITY
The utility for backing up or restoring NV-RAM parameters is started up.
Figure 5-2. NV-RAM BACKUP UTILITY
ADJUSTMENTS SEQUENCE
By selecting a part you replaced or repaired, this mode guides you to perform all the
required adjustments in a predetermined sequence.
1. Highlight the part you replaced or repaired in the left box and click the [Add]
button.
2. Click the [OK] button.
Figure 5-3. ADJUSTMENTS Sequence
C A U T I O N
The Service Program includes some adjustment items which should
not be performed at on-site service. Be sure not to perform any
adjustments that are not described in this manual at on-site service.
C A U T I O N
Make sure to connect one GS6000 to your computer at a time.
(Otherwise, an error message will appear on the Service Program
at the printer communication timing when the program detects
more than one printer; as is the case regardless of the model.)