Epson Stylus Pro GS6000 - Serviceman Mode

Epson Stylus Pro GS6000 Revision F
PRODUCT DESCRIPTION Control Panel 33
Confidential
1.4.4 Serviceman Mode
This printer has the Serviceman Mode which is provided for serviceman to
troubleshoot problems and so on. This section explains how to enter into the
Serviceman mode.
See ?7.2 Panel Menu Map? (p259) for explanation about menus provided in the mode.
HOW TO ENTER THE SERVICEMAN MODE
1. Turn off the printer by pressing the [Power] button.
2. Turn the printer on while pressing the
[Pause/Reset], [Paper Feed ], and
[Menu] buttons.
3. To exit the Serviceman mode, press the [Power] button to turn off the printer.
C A U T I O N
Do not disclose the Serviceman Mode to the users.