Epson Stylus Pro GS6000 - Cleaning the Pressure Rollers and Platen

Epson Stylus Pro GS6000 Revision F
MAINTENANCE Cleaning 250
Confidential
6. Close the MAINTENANCE COVER ASSY (left) firmly until it is locked.
Figure 6-16. Closing the Maintenance Cover
7. Press the [Pause/Reset] button several times to return to the READY state.
6.4.3 Cleaning the Pressure Rollers and Platen
1. Make sure the printer is turned off and all the lights are off, and then unplug the
power cords from the electrical outlets.
2. Leave the printer for a minute.
3. Open the Front Cover.
Figure 6-17. Opening the Front Cover
4. Remove paper powder and dust attached to the Pressure Rollers using a soft brush.
Figure 6-18. Removing the paper powder and dust
C H E C K
P O I N T
To reuse the Cleaning Stick, rinse it in the liquid and dry it for
about one hour after cleaning before putting it away.
C A U T I O N
Dispose of the used Ink Cleaner in the same way as the waste ink.
MAINTENANCE COVER ASSY (left)
Front Cover
Pressure Rollers