Epson Stylus Pro GS6000 - Cleaning

Epson Stylus Pro GS6000 Revision F
MAINTENANCE Cleaning 246
Confidential
6.4 Cleaning
This section explains cleaning operations. The cleaning described in this section is
basically expected to be carried out by the user. Therefore, if those cleaning is turned
out to be insufficient when checking, be sure to explain to the user the importance of
performing proper regular cleaning.
When cleaning the parts, use the dedicated Maintenance Kit (Code: C12C890611) and
Ink Cleaner (Code: C12C890621). Cleaning tools included in the kit are as follows.
<About metallic tray>
While maintaining the printer, put the used flushing pad, cleaning stick, or wiper in the
metallic tray in order to prevent them from causing any stains on the printer.
When not in use, store the tray in the empty space of the maintenance area, on the left
side of the printer.
Table 6-1. Maintenance Kit Components (Code: C12C890611)
Symbol Name Purpose
a Plastic Gloves Plastic gloves for cleaning or maintaining the printer.
b Flushing Pad Spare flushing pad for replacement.
c Cleaning Stick Used to clean the Cleaning Wiper or the PRINT HEAD.
d Carriage Rail Cleaner Used to clean the carriage rail.
e Carriage Rail Oil
Table 6-2. Ink Cleaner Components (Code: C12C890621)
Symbol Name Purpose
a Ink Cleaner Exclusive liquid cleaner to remove ink stains.
b Plastic Cup Used to contain Ink Cleaner.
a
b
cd e
ab