Epson Stylus Pro GS6000 - Lubrication

Epson Stylus Pro GS6000 Revision F
MAINTENANCE Lubrication 253
Confidential
6.5 Lubrication
OUTLINE
To maintain the functions and performance of the printer, make sure to properly
lubricate the parts/units specified in this section as necessary when replacing or
maintaining them.
LUBRICATION POINTS LIST
[Lubrication 1]
[Lubrication 2]
C A U T I O N
 Make sure not to lubricate each point more than necessary.
 Use the specified grease only.
 To lubricate a part already attached, wipe off the grease on the
part completely first, then apply the specified amount of grease
to it.
Table 6-3. Grease Application
Name Company Part No.
GREASE, G-26 Dow Corning Toray Co.,Ltd. 1080614
Supermulpus #32 --- 1432563
No. Lubrication Point Remarks
1 Gears of Pressure Lever p253
2 Pressure cams p253
3 Head U/D cams (both) p254
4 PG sliding sections (both) p254
5 Gears of Front Cover (both sides) p254
6 Top frame of Carriage Lock Solenoid p254
7 Spring hook of Pressure Lever p255
8 Sides of Pressure Lever collar p255
9 Sliders of Cap Assy p255
10 Rails for Carriage bearings (backside) p256
11 Rails for Carriage bearings (front side) p256
Lubrication Point Gears of Pressure Lever
Lubricant GREASE, G-26
Amount Three drops (rice grain size)
Remarks Apply it on the contact point of the large black gear and the small black
gear.
Lubrication Point Pressure cams
Lubricant GREASE, G-26
Amount One drop (rice grain size)
Remarks Apply it on the sliding section of each pressure cam.
As seen from the right side
Lubrication
Point
Pressure Lever’s gears
Lubrication
Point
As seen from the rear
Pressure cam
Pressure Roller holder