Epson Stylus Pro GS6000 - Tools for Adjustments

Epson Stylus Pro GS6000 Revision F
ADJUSTMENT Overview 191
Confidential
5.1.4 Tools for Adjustments
The table below shows the tools required for adjusting this printer.
Table 5-1. Tools for Adjustments
Type Name Part Number Note
Hard Tool
Push-pull Gauge
--- Can measure 110g
--- Can measure 3.85kg
Ruler --- Can measure 1,000mm
PG ADJUSTMENT JIG 1501563 ---
BELT TENSION
ATTACHMENT
1501564 ---
Marking Film 1502538 ---
Thread locker
Commercially
available
You must use the following product.
 Supplier: ThreeBond
 Product name: 1401
Software Service Program --- Supplies