Epson Stylus Pro GS6000 - Ink and Flushing Pad Management

Epson Stylus Pro GS6000 Revision F
TROUBLE SHOOTING Remedies for Service Call Error 55
Confidential
3.4 Remedies for Service Call Error
The following tables explains the Service Call error messages and remedies.
C H E C K
P O I N T
Make sure to check the related connectors and cables for poor
connection or any abnormality before replacing any electrical part
as instructed in the Remedy column. If the replacement does not
solve the problem, replace the main board.
Error Code Error Name Description Remedy/Point to be checked
1101
Life end of the CR MOTOR and
the INK TUBE
The number of carriage movement cycles reached the specified upper
limit.
Update the printer with the latest firmware.
Replace the CR MOTOR (p.151) and the INK TUBE (p.173), perform
the necessary adjustments and clear the counter using the Service
Program (p.233).
1125
Carriage home position detection
error
The printer cannot detect the carriage home position. Check whether the CR HP SENSOR is properly connected.
Check whether the CR HP SENSOR is correctly installed.
Replace the CR HP SENSOR (p.126).
Check whether the carriage lock properly functions (p.234).
1133
CR MOTOR in position time-out
error
The CR MOTOR cannot be driven normally. Clean the CR ENC SCALE.
Replace the CR MOTOR (p.151).
Replace the CR HP SENSOR (p.126).
1135
CR ENC ASSY check error The CR ENC ASSY signals have a defect. Check whether the CR ENC ASSY is properly connected.
Check whether the CR MOTOR is properly connected.
Replace the CR ENC ASSY (p.128).
Replace the CR MOTOR (p.151).
1136
CR MOTOR step-out error The CR MOTOR is out of step. Clean the CR ENC SCALE.
Check whether the CR HP SENSOR is properly connected.
Check whether the CR HP SENSOR is correctly installed.
Replace the CR HP SENSOR (p.126).
1137
CR servo parameter error The carriage unit is overloaded abnormally. Check whether any foreign matter is obstructing the carriage movement.
If any obstruction is found, remove it.
Replace the CR MOTOR (p.151).