Epson Stylus Pro GS6000 - Cleaning and Lubricating the CR Rail

Epson Stylus Pro GS6000 Revision F
MAINTENANCE Cleaning 252
Confidential
6.4.4 Cleaning and Lubricating the CR rail
This operation prevents the CR from becoming noisy.
CLEANING
Using nonwoven cloth moistened with Supermulpus #32, clean the following three
points that the bearings of the carriage unit touch.
Figure 6-21. Cleaning the CR rail
LUBRICATING
Refer to [Lubrication 10] and [Lubrication 11] in ?6.5 Lubrication? (p.253).
A
A
A
B
C
Cross-section diagram