Epson Stylus Pro GS6000 - Head Nozzles Alignment Adjustment

Epson Stylus Pro GS6000 Revision F
ADJUSTMENT Head Related Adjustments 218
Confidential
5.4.7 Head Nozzles Alignment Adjustment
This allows you to check whether the head nozzles are horizontally aligned. If some
abnormality is found, run a cleaning.
 Paper Used
 Size: 1250 mm
 Type: the paper type used by the user
 Procedure
1. Refer to ?5.1.6 Cautions and Preparation for Pattern Printing? (p.197), and
prepare for printing the pattern.
2. Select Adjustment => Nozzle Alignment => Output Pattern => [Enter]
Print, and press the [Enter] button to print an alignment check pattern.
3. Check the printout pattern for any misalignment symptoms.
4. If misalignment is found, execute cleaning in Nozzle Alignment.
Figure 5-34. Alignment Check Pattern
Horizontal Alignment (Color : lm, lc, G, O, Y, K, C, M) VSD3 Large MecNo. XXXXXXXXXX Date (YY/MM/DD) xx/xx/xx