Epson Stylus Pro GS6000 - Page 217

Epson Stylus Pro GS6000 Revision F
ADJUSTMENT Head Related Adjustments 217
Confidential
SUB SCANNING DIRECTION
 Paper Used
 Size: 1250 mm
 Type: Marking Film
 Procedure
1. Refer to ?5.1.6 Cautions and Preparation for Pattern Printing? (p.197), and
prepare for printing the pattern.
2. Select Adjustment => Head Slant => PF Head Slant => [Enter] Print, and
press the [Enter] button to print an adjustment pattern.
3. Click [Print] to print an adjustment pattern.
4. When the printout result is OK, turn the printer off to end the adjustment.
When the result is NG, replace the CR CURSOR ASSY.
Figure 5-32. Adjustment Pattern
Figure 5-33. Judging the Printout Result
C A U T I O N
The heads slant and alignment must be correctly adjusted before
checking this pattern. (See ?5.4.6 Head Slant and Alignment
Adjustment? (p212))
PF directional Head Slant VSD3 Middle MecNo. XXXXXXXXX Date ( YY/MM/DD ) xx/xx/xx