Epson Stylus Pro GS6000 - Cleaning and Washing

Epson Stylus Pro GS6000 Revision F
ADJUSTMENT Head Related Adjustments 209
Confidential
5.4.3 Cleaning and Washing
5.4.3.1 Cleaning
 Procedure
1. Turn the printer ON.
2. Start the Service Program and select Cleaning Very Light, Light, Medium
and Heavy.
3. Select the cleaning type and press the corresponding key (F1 to F4) to perform
the selected cleaning.
4. When the cleaning is completed, click the [Finish] button.
Figure 5-29. [Cleaning] Screen
5.4.3.2 Washing
If the nozzles are still clogged after cleaning the PRINT HEAD a few times, perform
head washing.
 Required Tool
Cleaning cartridges
 Procedure
1. Turn the printer ON.
2. Select MAINTENANCE => HEAD WASHING, and press the [Enter]
button.
3. Execute Washing following the instruction on the panel. (Empty the Waste
ink tank when requested on the panel.)
Key Cleaning
Running time
(reference)
F1 Very Light Approx. 1min., 17sec.
F2 Light Approx. 1min., 17sec.
F3 Medium Approx. 1min., 29sec.
F4 Heavy Approx. 2min., 37sec.