Epson Stylus Pro GS6000 - Nozzle Check Pattern

Epson Stylus Pro GS6000 Revision F
ADJUSTMENT Head Related Adjustments 208
Confidential
5.4.2 Nozzle Check Pattern
This menu allows you to check the ink nozzles for clogging. If they are found to be
clogging, perform a cleaning and then check them again.
 Paper Used
 Size: 1250 mm
 Type: None specified
 Procedure
1. Turn the printer ON.
2. Start the Serviceman Program and select Nozzle Check Pattern.
3. Select Nozzle Check, and click [Run] to print a nozzle check pattern.
4. Check the printed pattern for dot missing.
5. When no dot missing is observed, click [Finish] to finish checking.
If there is dot missing, perform a cleaning (refer to ?5.4.3 Cleaning and
Washing? (Page 209)). Then print the pattern again to check
Figure 5-26. [Nozzle Check Pattern] Screen
Figure 5-27. Nozzle Check Pattern
Figure 5-28. Judging the Printout Result
C H E C K
P O I N T
When either A or B nozzle is found as clogged, the user can specify
not to use the clogged one by setting the MicroWeave setting of the
printer driver to Extra High A or Extra High B.
Vertical Alignment (Color : lm, lc, G, O, Y, K, C, M) VSD3 Large MecNo . XXXXXXXXXX Date (YY/MM/DD) xx/xx/xx
ABABABABA
Head1 (L)Head2 (R)
BABABAB