Epson Stylus Pro GS6000 Revision F
ADJUSTMENT Overview 194
Confidential
PRINT IMAGE
This allows you to send an image file to the printer to make a test print.
1. Click [Open] and select any one of the image files.
NOTE: You may change the MicroWeave.
2. Click [Print] to print the selected image.
3. After checking the printed image, click the [Finish] button
NOTE: It may take some time to transmit the data to the printer and print.
During this time, the printer may not respond to another command.
Figure 5-6. Pint Image
FLAG CHANGE & COUNTER RESET
You can set various kinds of internal flags and reset various kinds of counters.
Figure 5-7. Flag Change & Counter Reset
To Next Page
Loading...
