Epson Stylus Pro GS6000 - Page 22

EPSON Stylus Pro GS6000 Revision F
PRODUCT DESCRIPTION Control Panel 22
Confidential
<Combination of Low and High Heat Lights>
 When the printer is READY
 When selecting a Heater to set the temperature.
DISPLAY
Figure 1-9. Display
High Heat Low Heat Status
On On The three heaters have reached preset temperature.
Flashing Off
One or more of the heaters is/are trying to reach the preset
temperature.
Flashing Flashing A heater error has occurred.
Off Off Heaters are off.
High Heat Low Heat Status
On On
You can change the temperature to higher or lower than
the current setting.
On Off
You can change the temperature to higher than the current
setting.
Off On
You can change the temperature to lower than the current
setting.
Name Description
a
Messages
Displays the printer status, operation, and error messages.
b
Paper Type
When you select paper type (1 to 30) in the Paper Setup
menu, the number you selected appears.
c
Ink cartridge
status icon
Displays the remaining amount of ink in each cartridge.
d Platen Gap icon Displays the Platen Gap setting that is read by the sensor.
eHeater icon
Displays the preset temperature and the current temperature
of the Pre Heater, Platen Heater, and After Heater.
a
b
c
d
e