Epson Stylus Pro GS6000 - Page 248

Epson Stylus Pro GS6000 Revision F
MAINTENANCE Cleaning 248
Confidential
9. On the front side of Cleaning Wiper, clean the surface horizontally.
10. On the back side of Cleaning Wiper, clean the surface vertically.
Figure 6-11. Cleaning the Cleaning Wiper (front side and back side)
11. Close the MAINTENANCE COVER ASSY (right) firmly until it is locked.
Figure 6-12. Closing the Maintenance Cover
12. Press the [Pause/Reset] button to return to the READY state.
C A U T I O N
Do not place anything on an opened maintenance cover as it is not
able to handle much weight and it may fall.
Step 9
Cleaning Wiper
Step 10
C H E C K
P O I N T
To reuse the Cleaning Stick, rinse it in the liquid and dry it for
about one hour after cleaning before putting it away.
As the ink cleaner is provided separately from the cleaning kit,
users are advised not to re-use the cleaning sticks but provided that
they are rinsed in the cleaning liquid, they may be re-used if they
are in good condition.
C A U T I O N
Dispose of the used Ink Cleaner in the same way as the waste ink.
MAINTENANCE COVER ASSY (right)