Epson Stylus Pro GS6000 - Setup and Operation Safety

Confidential
D September 18, 2009 Ch1:
 Ink set configuration (p. 14)
Added the Ink Set Configuration.
Ch5:
 5.3.2 CR Reduction Belt Tension Adjustment (p. 201)
Added the procedure.
E January 15, 2010 Ch4:
 4.1.1 Precautions (p. 64)
Changed the cautions partially.
 4.4.6.3 MAIN BOARD ASSY (p. 110)
Modified the adjustment.
 4.4.11.11 CR CURSOR ASSY (p. 175)
Modified the adjustment.
 4.4.9.2 CR REDUCTION BELT (p. 144)
Modified the adjustment.
 4.4.9.5 CR MOTOR (p. 151)
Modified the adjustment.
 4.4.11.1 PRINT HEAD/VALVE ASSEMBLY, HEAD (p. 158)
Modified the adjustment.
Ch5:
 5.1.2 Adjustment Items and the Order by Repaired Part (p. 186)
Changes partially.
 5.6.4.1 IP Address Setup (p. 228)
Added the adjustment.
 5.6.4.2 Network Test (p. 228)
Changed.
 5.6.5 NVRAM CLEAR OK (p. 229)
Added the adjustment.
 5.6.6 Rear Sensor Test/Rear AD Adjustment (p. 230)
Added the adjustment.
 5.6.7 Input Serial Number (p. 231)
Added the adjustment.
 5.6.8 CR Origin Adjustment (p. 232)
Added the adjustment.
 5.3.2 CR Reduction Belt Tension Adjustment (p. 201)
Changed the procedure. Added the Video. (Chapter 8)
Revision Date of Issue Description