Epson TM-T90 - ESC 3 N; ESC = N

Confidential
EPSON
TITLE SHEET
REVISION
NO.
SHEET NEXT
F
87 86
TM-T90
Specification
(STANDARD)
ESC 3 n
[Name] Set line spacing
[Format] ASCII ESC 3 n
Hex 1B 33 n
Decimal 27 51 n
[Range] 0 ≤ n ≤ 255
[Default] • For ANK/Multilingual model:
Equivalent to approximately 4.23 mm {1/6"}.
• For Japanese model:
Equivalent to approximately 3.75 mm {30/203" or 0.15”}
[Description] • Sets the current line spacing to [n × vertical motion units] inches.
[Notes] • For ANK/Multilingual model:
The maximum settable line spacing is 1016 mm {40"}.
• For Japanese model:
The maximum settable line spacing is 900 mm {35.5"}.
ESC = n
[Name] Select peripheral device
[Format] ASCII ESC = n
Hex 1B 3D n
Decimal 27 61 n
[Range] 1 ≤ n ≤ 3
[Default] Serial interface specification:
•
When turning on the printer: n = 1
•
When executing
ESC @
:
n
Setting before executing
ESC @
1 2 3
After
ESC @
processing
1 2 1
[Description] • Selects device to which host computer sends data, using n as follows:
n Function
1 Specifies printer only.
2 Specifies customer display only.
3 Specifies printer and customer display.