Epson TM-T90 Specification

Confidential
EPSON
TITLE SHEET
REVISION
NO.
SHEET NEXT
F
64 63
TM-T90
Specification
(STANDARD)
3.6 Hexadecimal Dumping
1) Hexadecimal dumping function
This function prints the data transmitted from the host computer in hexadecimal numbers and in
their corresponding characters.
2) Starting hexadecimal dumping
Open the cover and turn the power on while pressing the paper FEED button (located inside the
printer) or executing the
GS ( A
command; then close the cover. The printer first prints
"Hexadecimal Dump To terminate ..." on the paper roll and prints the received print data in
hexadecimal numbers and in their corresponding characters.
NOTES: 1. If a character does not correspond to the data received, the printer prints ".".
2. During hexadecimal dumping, any commands other than
DLE EOT, DLE ENQ
, and
DLE DC4
do not function.
3. Insufficient print data to fill the last line can be printed by setting the printer Offline.
3) Ending hexadecimal dumping
Hexadecimal dumping ends by turning the power off, pressing the paper FEED button three times,
or resetting the printer after printing has finished.
<Printing example>
Hexadecimal Dump
To terminate hexadecimal dump,
press FEED button three times.
1B 21 00 1B 26 02 40 40 1B 69 . ! . . & . @@ . i
1B 25 01 1B 63 34 00 1B 30 31 . % . . c 4 . . 0 1
41 42 43 44 45 46 47 48 49 4A A B C D E F G H I J
*** completed ***

Epson TM-T90 Specifications

General

Brand	Epson
Model	TM-T90
Category	Printer
Language	English